Using Gel Filters In Flash Units
Create special effects with your gel filter
Gel filters, which are transparent pieces of the film made of heat-resistant plastic and which are available in different colors. By applying color to the light can change a lot in the bright light in the flash unit.
If you don’t want to use software processing or post-processing in these cameras, cool special effects in your photos with gel filters may be possible. Obviously, people who have DSLR cameras and external flash units like Speedlites will be able to use gel filters. Cannot use built-in flash gel filters on a point-and-shoot camera.
Try these tips for using gel filters in your DSLR photos.
Simple gel filter:
Most of the time, a gel filter is just a sheet of paint, which is stained with paint. Many times, photographers place Velcro strips around the sides of the flash unit and also place Velcro strips in front of the end of the gel filter strip. Then it is easy to attach the gel filter to the flash unit, throwing it in front of the flash.
Improving The Light Source:
One use for gel filters is to improve the results of flash images taken while shooting in fluorescent and incandescent lights. For example, an incandescent gel filter yellow tint is often such images, when the gel filter is combined with the digital camera to establish the white balance incandescent. The same technique works with fluorescent gel filters and a white balance setting of fluorescent.
Using Multiple Filters:
The gel filter works very well with fire remote flash units at the same time in the background. For example, you could use a remote flash unit to shoot another indoor holiday image with a red gel filter and a green gel filter with a background wall. Remote flash units can annoy the harsh shadows against the wall with the primary flash mounted on the camera, which is the color of the holiday at the same time.
Strange Angle Options:
Consider shooting the subject from the wall lighting, floor lighting, and following with a gel filter on the flash. With glitter along the floor, you can create some interesting light patterns and some interesting color combinations. This is a difficult shot, which may be to get proper exposure, but it will definitely create a unique look.
Change Scene Mode:
Another option to use a gel filter with your DSLR camera and flash is to try changing the image mode. You may want to give your subject a sense of anger or resentment, as shown in the attached image here. The use of red gel filters can greatly affect the image mode from the viewer’s point of view.
Hearing A Chimney:
When shooting a family photo in front of a fire, there is a good contact of the fire. If it’s mid-summer and you don’t want an actual fire, however, try placing the remote flash unit with a red gel filter in the fireplace with one or two. As the picture shows, a red flash from the fireplace can ignite the fire, which adds heat to the picture.
Tip Into Your Creative Side:
Finally, create with gel filters. You can create some real images with gel filters. If you have a volunteer article, try a few different positions for remote flash units and try a few different colors of gel filter to help you get the ultimate results.